Inputs Via Rcvds05; 5-Cable Input; Overview Possible Connections - Barco BARCOREALITY 6500 Owner's Manual

3. Connections
Set up of the input selection
1. Press ENTER to start up the adjustment mode.
2. Press the cursor keys to select Installation. (menu 3-1)
3. Press ENTER to display the Installation menu.
4. Press the cursor keys to select Input slots. (menu 3-2)
5. Press ENTER to display the Input Slots menu.
6. Press the cursor keys to select Slot Selector. (menu 3-3)
7. Press ENTER to toggle between [Manual] or [Automatic].
8. Press EXIT several times to leave the adjustment mode.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
Source 01
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 3-1

3.5.2 Inputs via RCVDS05

Overview
When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module have to be
connected to the 5 cable input (slot 1) of the projector. To switch the projector in the 5-cable mode see chapter 'Installation mode'.

3.5.3 5-cable input

Where to find ?
Slot 1 has 5 BNC input terminals. These are in the left corner on the front panel.
Image 3-5

Overview possible connections

Which signals can be connected to the 5 cable input.
The following signals can be connected to these BNC connectors :
Connector name
RGBHV
RGBS
RGsB
Composite video
Super Video
20
Downloaded From projector-manual.com Barco Manuals
TEXT BOX POSITION
SERVICE QUICK ACCESS KEYS
NETWORK CONFIGURATION
Select with ↑ or ↓
<EXIT> to return.
Menu 3-2
INSTALLATION
INPUT SLOTS SLOT SELECTOR [Automatic]
NO SIGNAL
LENS x 1. RGB [HV&VS]
- 2. RGB [HV&VS]
- 3. VIDEO
START UP MODE - 4. S-VIDEO
- 5. DIGITAL INPUT
more ... - 6. IEEE 1394
then <ENTER>
Menu 3-3
R
R
R
R
-
-
INPUT SLOTS
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return.
B H
G
G B H
G B S
-
Gs B
- -
Video
- -
Y
R5976182 BARCOREALITY 6500 30012001
V
V
-
-
-
C