Specifying Log Encryption - Ricoh MP C6502 series Operation Manual

If "Access Log Collect Level" is set to [Level 2], all access logs are collected.
Eco-friendly Log Collect Level
If "Eco-friendly Log Collect Level" is set to [Level 1], eco-friendly logs are not collected.
If "Eco-friendly Log Collect Level" is set to [Level 2], all eco-friendly logs are collected.
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Active] for each function: "Collect Job Logs", "Collect Access Logs" and "Collect
Eco-friendly Logs".
5. Specify the collection level for each function, "Job Log Collect Level", "Access Log Collect
Level", and "Eco-friendly Log Collect Level".
When a level is changed, the selection status of log details changes according to the level.
To change individual items of the log details, configure the setting for each item. Even if the
collection level is set to [Level 1] or [Level 2], once individual items of the log details are changed,
the level changes to [User Settings].
6. Click [OK].
7. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
If the previous screen does not reappear after you click [OK], wait for a while, and then click the
web browser's refresh button.
8. Log out.
• The greater "Access Log Collect Level" setting value, the more logs are collected.

Specifying Log Encryption

Use the following procedure to enable/disable log encryption.
To encrypt the logs, it is necessary to set the collection setting to active for job log, access log, or eco-
friendly log.
If the data stored in the machine has been encrypted, the log files will still be encrypted, regardless of
this setting.
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Active] in the [Encrypt Logs] area under "Common Settings for All Logs".
To disable log encryption, select [Inactive].
Using Web Image Monitor to Manage Log Files
227