Specifying Network Security Level Using Web Image Monitor; Status Of Functions Under Each Network Security Level - Ricoh MP C6502 series Operation Manual

5. Press [Network Security Level].
6. Select the network security level.
Select [Level 0], [Level 1], [Level 2], or [FIPS140].
7. Press [OK].
8. Log out.

Specifying Network Security Level Using Web Image Monitor

1. Log in as the network administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Network Security] under "Security".
4. Select the network security level in "Security Level".
5. Click [OK].
6. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
If the previous screen does not reappear after you click [OK], wait for a while, and then click the
web browser's refresh button.
7. Log out.

Status of Functions under Each Network Security Level

TCP/IP
Function
TCP/IP
HTTP > Port 80
IPP > Port 80
Level 0 Level 1
Active Active
Open Open
Open Open
Specifying Network Security Level
FIPS 140 Level 2
Active Active
Open Open
Open Open
119