Ldap Authentication - Ricoh MP C6502 series Operation Manual

LDAP Authentication

L0103-000
A TWAIN operation occurred during authentication.
• Make sure no other user is logged in to the machine, and then try again.
L0104-000
Failed to encrypt password.
• A password error occurred.
Make sure the password is entered correctly.
• Either [DES] or [AES] is selected for "Driver Encryption Key: Encryption Strength".
You can make access by specifying the driver encryption key.
• A driver encryption key error occurred.
Make sure that the encryption key is correctly specified on the driver.
L0105-000
A login user name was not specified but a DeskTopBinder operation was performed.
• Set the DeskTopBinder login user name correctly.
L0206-002
A user attempted authentication from an application on the "System Settings" screen, where only the
administrator has authentication ability.
• Only the administrator has login privileges on this screen.
• Log in as a general user from the application's login screen.
L0206-003
An authentication error occurred because the user name contains a space, colon (:), or quotation mark
(").
• Recreate the account if the account name contains any of these prohibited characters.
• If the account name was entered incorrectly, enter it correctly and log in again.
L0207-001
An authentication error occurred because the Address Book is being used at another location.
• Wait a few minutes and then try again.
L0208-000 / L0208-002
The account is locked because you have reached the maximum number of failed authentication attempts
allowed.
• Ask the user administrator to unlock the account.
If an Error Code is Displayed
275