Ricoh MP C6502 series Operation Manual page 1271

7. Managing the Machine
Tab
Administrator
Tools
Administrator
Tools
Administrator
Tools
Administrator
Tools
Administrator
Tools
Administrator
Tools
Administrator
Tools
262
Item
Extended Security
Settings by SNMPv1, v2
Extended Security Driver
Encryption Key:Encryption
Strength
Extended Security
Authenticate Current Job
Extended Security
Password Policy
Network Security Level
Service Mode Lock
Machine Data Encryption
Settings
Setting
Prohibit
See page 252 "Specifying the Extended
Security Functions".
AES
See page 252 "Specifying the Extended
Security Functions".
Access Privilege
See page 252 "Specifying the Extended
Security Functions".
"Complexity Setting": Level 1 or higher,
"Minimum Character No.": 8 or higher
See page 252 "Specifying the Extended
Security Functions".
Level 2
To acquire the machine status through printer
driver or Web Image Monitor, set "SNMP" to
Active on Web Image Monitor.
See page 118 "Specifying Network Security
Level".
On
See page 260 "Restricting a Customer
Engineer Operation".
Select [Encrypt], and then select [All Data] for
"Carry over all data or file system data only
(without formatting), or format all data.".
If [Encrypt] is already selected, further
encryption settings are not necessary.
See page 95 "Encrypting Data on the Hard
Disk".