Ricoh MP C6502 series Operation Manual page 968

Message
"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."
"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."
"Collate has been
cancelled."
"Exceeded the maximum unit
count for Print Volume Use.
The job has been
cancelled."
"Exceeded the maximum
number of multi-sheet fold.
The job has been
cancelled."
"Fold is not available with
the settings. The job has
been cancelled."
"Receiving data failed."
"Sending data failed."
"The selected paper size is
not supported. This job has
been cancelled."
Causes
The [Enter User Text:] field
on the [Unauthorized Copy
Prevention for Pattern
Details] screen is blank.
The resolution is set to a
value less than 600 dpi
when [Unauthorized Copy
Prevention] is specified.
Collate was canceled.
The number of pages the
user is permitted to print has
been exceeded.
The maximum number of
multi-sheet fold was
exceeded.
Fold function is not available
with the current settings.
Data reception was aborted. Resend the data.
The machine received a
command to stop
transmission from the printer
driver.
Job reset is automatically
performed if the specified
paper size is incorrect.
Messages Displayed When Using the Printer Function
Solutions
On the printer driver's [Detailed
Settings] tab, click [Effects] in "Menu:".
Select [Unauthorized Copy
Prevention], and then click [Details] to
display [Unauthorized Copy
Prevention for Pattern Details]. Enter
text in [Enter User Text:].
On the printer driver, set the resolution
to 600 dpi or higher, or deselect
[Unauthorized Copy Prevention].
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
For details about print volume use
limitation, see Security Guide
Specify fewer sheets for the multi-sheet
fold function.
For details about the maximum number
of multi-sheet fold, see "Fold", Print
Check the paper settings. For details
about the limitations of the Fold
function, see "Fold", Print
Check if the computer is working
correctly.
Specify the correct paper size, and
then print the file again.
.
.
.
175