Deleting All Logs; Disabling Log Transfer To The Log Collection Server - Ricoh MP C6502 series Operation Manual

9. Information about the outputting of the print job is recorded as an entry in the Job Log (using
the same ID).
10. Authentication (logout) data is recorded as an entry in the Access Log.

Deleting All Logs

Use the following procedure to delete all logs stored in the machine.
"Delete All Logs" appears if one of the job log, access log, or eco-friendly log is set to [Active].
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Click [Delete] under "Delete All Logs".
5. Click [OK].
6. Log out.

Disabling Log Transfer to the Log Collection Server

Use the following procedure to disable log transfer to the log collection server. Note that you can switch
the log transfer setting to [Inactive] only if it is already set to [Active].
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Inactive] in the [Transfer Logs] area under "Common Settings for All Logs".
5. Click [OK].
6. Log out.
Using Web Image Monitor to Manage Log Files
233