Specifying Authentication Information To Log On - Ricoh Aficio MP C2050 Operating Instructions Manual

Specifying Authentication Information to Log on

The login user name and password specified in "Address Book Management" can be used as the login
information for "SMTP Authentication", "Folder Authentication", and "LDAP Authentication".
If you do not want to use the login user name and password specified in "Address Book Management" for
"SMTP Authentication", "Folder Authentication", or "LDAP Authentication", see "Address Book" Network
and System Settings Guide.
For details about specifying login user name and login password, see "Specifying Login User Name and
Login Password".
• When using "Use Auth. Info at Login" for "SMTP Authentication", "Folder Authentication", or "LDAP
Authentication", a user name other than "other", "admin", "supervisor" or "HIDE***" must be
specified. The symbol "***" represents any character.
• To use "Use Auth. Info at Login" for "SMTP Authentication", a login password up to 128 characters
in length must be specified.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Select the user or group.
6. Press [Auth. Info].
7. Select [Use Auth. Info at Login] in "SMTP Authentication".
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
For folder authentication, select [Use Auth. Info at Login] in "Folder Authentication".
For LDAP authentication, select [Use Auth. Info at Login] in "LDAP Authentication".
8. Press [OK].
9. Press [Exit].
Basic Authentication
3
51