2.
Check the present value. Is it higher than +1.5%?
Yes
No further improvement is likely. Contact your service representative.
No
Increase the value by 0.5 percentage points.
3.
Print the image. Is the problem resolved?
Yes
Finished!
No
Repeat Steps 1 to 3. If the problem persists even though you have increased the value to
+1.5%, contact your service representative.
Two 13-mm Long Vertical Streaks
Two 13-mm long vertical streaks appear within 110 mm (4.4 inches) from the leading edge.
110 mm
(4.4 in.)
Cause:
The invert exit idle rollers in the drawer are soiled.
This may occur if:
• Sheets are delivered face down after one-sided printing
• Images are printed on a white or halftone yellow background
Solution:
Clean the invert exit idle rollers in the drawer.
1.
Make sure that the system is turned off and the machine power cord is disconnected from
the power source.
13 mm
(0.5 in.)
67 mm
(2.6 in.)
13 mm
(0.5 in.)
CNT005
Color Toner Spotting/Staining
23