Ricoh MP C6502 series Operation Manual page 987

9. Troubleshooting
When documents cannot be stored on a memory storage device
Message
"Cannot write on the
memory storage device
because remaining free
space is insufficient."
"Cannot write on the
memory storage device
because the device is write-
protected."
"Cannot write on the
memory storage device.
Check the memory storage
device and machine
settings."
"Exceeded max. page
capacity per file. Press
[Write] to write the scanned
data to the memory storage
device, or press [Cancel] to
delete."
194
Causes
The memory storage device
is full and scan data cannot
be saved. Even if the
memory storage device
appears to have sufficient
free space, data might not
be saved if the maximum
number of files that can be
saved is exceeded.
The memory storage device
is write-protected.
The memory storage device
is faulty, or the file name
contains a character that
cannot be used.
The scan could not be
completed because the
maximum number of pages
that can be scanned by this
machine was exceeded
during writing to the memory
storage device.
Solutions
• Replace the memory storage
device.
• If the document is scanned as
single-page or divided multiple
pages, data already written to the
memory storage device is saved
as is. Replace the memory storage
device, and then press [Retry] to
save the remaining data, or press
[Cancel] to redo the scan.
Unlock the write-protection on the
memory storage device.
• Check to see if the memory
storage device is defective.
• Check the memory storage
device. It might be unformatted,
or its format might be
incompatible with this machine.
• Check the file name set at the time
of scanning. For details about the
characters that can be used in file
names, see "Specifying the File
Name", Scan .
Reduce the number of documents to be
written to the memory storage device,
and then try again.