Ipsec Settings - Ricoh MP C6502 series Operation Manual

When IPsec is enabled, set 1 has the highest priority and 4 has the lowest. You can use this priority
system to target IP addresses more securely. For example, set the broadest IP range at the lowest
priority (4), and then set specific IP addresses at a higher priority level (3 and higher). This way,
when IPsec transmission is enabled for a specific IP address, the higher level settings will be
applied.

IPsec Settings

IPsec settings for this machine can be made on Web Image Monitor. The following table explains
individual setting items.
IPsec settings items
Setting
IPsec
Exclude HTTPS
Communication
The IPsec setting can also be made from the control panel.
Encryption key auto exchange security level
When you select a security level, certain security settings are automatically configured. The
following table explains security level features.
Security level
Authentication Only
Description
Specify whether to enable or
disable IPsec.
Specify whether to enable
IPsec for HTTPS transmission.
Security level features
Select this level if you want to authenticate the transmission
partner and prevent unauthorized data tampering, but not
perform data packet encryption.
Since the data is sent in cleartext, data packets are vulnerable
to eavesdropping attacks. Do not select this if you are
exchanging sensitive information.
Configuring IPsec
Setting value
• Active
• Inactive
• Active
• Inactive
Specify "Active" if you do not
want to use IPsec for HTTPS
transmission.
143