Water Pump Shaft Removal - Honda CH250 Elite 1986 Service Manual

COOLING SYSTEM
Inspect the mechanical seal and seal washer for wear or dam-
age.
NOTE
• The mechanical seal and seal washer must be replaced as a
set.
WATER PUMP SHAFT REMOVAL
Disconnect the pulse generator and altElmator wire coupler
and connector.
Disconnect the water hose from the right crankcase cover.
Remove the right crankcase cover, gasket and dowel pins.
Remove the snap ring ·from the right crankcase cover,
Remclve the water shaft.
quietly, Replace the jf races do not turn sm,oothly
or fit loosely on the shaft.
race of each water pump shaft with
your The should turn quietly.
Also check that inner race fits tightly onthe shaft.
12-7