Clutch/Driven Pulley Disassembly; Driven Pulley Disassembly - Honda CH250 Elite 1986 Service Manual

DRIVE PULLEY/CLUTCH/DRIVEN PULLEY
Check the clutch shoes for wear or dSIYla,ge.
Measure clutch thickness.
SERVICE LIMIT: 2.0
mm
10.Oain)
NOTE
the clutch shoes as a set.
(2) CLUTCH SPRING COMPRESSOR: 07960-KM10000
DISASSEMBLY
Hold and compress the driven pulle\l'/clutc:h assembly with the
clutch compressor.
NOTE
• Do not the tool more than necessary to avoid
dalYl8Qing the drive
Set the tool in
l:l
vise and remove the lock nut.
Loosen the tool and disassemble the driven pulley/clutch
assembly.
11lLOCK NUT WRENCH mm) 07916-9580300
Remove the circlips and disassemble the clutch.
(1) CIRCUPS
DRIVEN
r U ' L L C
DISASSEMBLY
Remove the seal collar.
8-10