Water Pump/Thermostat - Honda Metropolitan CHF50 Service Manual

COOLING SYSTEM
WATER PUMP/THERMOSTAT
REMOVAL
WATER PUMP
Drain the coolant (page 6-7).
Remove the following:
- Step floor (page 2-9)
- Lower cover (page 2-10)
- Ignition coil (page 16-7)
Remove the ignition coil wire from the wire band.
Remove the clamp and disconnect the water hoses.
Remove the wire band from the water pump stay.
Remove the clamp and disconnect the water hoses.
Remove the bolts and the water pump.
WATER HOSES
WATER PUMP
BOLTS
6-9