Installation - Honda CH250 Elite 1986 Service Manual

DISASEMBLY
Remove the
mm socket bit.
socket bolts using a impact driver and 6
ALTERNATORISTARTER CLUTCH
Remove the one way clutch from the one way clutch outer.
Inspect the one way clutch rollers for wear or damage and re-
place if necessary.
ASEMBLY
the way the one way clutch outer.
Install the way clutch assembly to the flywheel and tight-
en with the 6 mm bolts.
TORQUE: 28-32N·m /2.8-3.2 kg-m, 21-24 ft-Ibl
(1 ) STARTE DRIVEN GEAR
(4) SOCKET BOLT
agent to the thread of socket bolts
INSTALLATION
driv(in gear onto the crankshaft.
and set bolt.
10-5