Radiator Coolant; Radiator Core; Cooling System Hoses & Connections; Carburetor - Idle Speed - Honda CH250 Elite 1986 Service Manual

RADIATOR COOLANT
Place the scooter on its center stand.
Remove the front cover lid 12-21.
Start the
Check the radiator coolant level of the reserve tank with the
running at normal operating temperature. The level
should be between the "UPPER" and "LOWER" line with a
50/50 mixture of water and anti-freeze.
Reinstall the reserve tank cap.
Reinstall the front cover 12-3).
RADIATOR CORE
Remove
the
front upper cover
13-5).
Check the air passages for or dal:nage.
Str'aigihteln bent
Remove any obstructions with compressed air or low water
pressure.
Replalce the radiator if the air flow is restricted over more than
20%
of the surface.
NOTE
CARBURETOR-IDLE SPEED
13-2\.
center cover
'85:
Remove the
After
'85:
Remove the adjustment hole cap from the body center cover.
COOLING SYSTEM HOSES
&
CONNECTIONS
Inspect the hoses for cracks or deterioration, and replace if
necessary.
Secure all hose
GIi:UTl!PS.
• Inspect and idle speed after all other
ments are within specifications.
• The must be warm for accurate idle Inspection and
ad.iustmlent. Ten minutes of stop and go
is sufficient.
Place the scooter on its center stand and warm up the
Connect a tachometer.
Turn the throttle stop screw to obtain the idle speed.
IDLE SPEED: 1,500 ± 100 rpm (1) THROTTLE STOP SCREW
3-8