Camshaft Installation - Honda CH250 Elite 1986 Service Manual

Install the carburetor and tighten the insulator and cnl,nf~ctina
tube bands.
Install the thermostat onto the head with the
bolt.
Install the exhaust the two nuts.
CAMSHAFT INSTALLATION
Remove the mark hole cap.
Turn the drive and al1gn the "T" mark on the flv'wheel
with the index notch on the right crankcase.
Position the intake and exhaust cam lobes down.
Align the punch mark on the cam with the cvlinl::ler
head surface and install the cam chain over the cam sprocket.
CYLINDER HEAD/VALVES
TORQUE: 8-12 N-mIO.8-1.2 kg-m. 6-9 fHbl
Install the camshaft
the two bolts.
holder onto the cylin,jer head and
the "T" mark on the flywheel with the index mark and
make sure that the mark on
the cam
sprocket is
with
the
rear side of the head surface.
Install new cam chain tensioner
Press down on the tab to release the push rod.
Push the rod back into the tensioner body, and
to secure the rod.
the tab
6-13