DRIVE PULLEY/CLUTCH/DRIVEN PULLEY
NOTE
TORQUE: 2.5-4.0 N·m (0.25-0.4 kg-m, 1.8-2.9 ft-lbl
(1) BOLTS
the cover
face seal cover, and
•
Make sure that the
is in position.
< - - - « - - - - - - - - - - - - - < - - - - - - - - - - -
Install the ramp
attaching bolts.
Apply grease (4- 5
g)
to the inside of the drive pulley collar.
Install the drive
face collar with the
side
out.
Clean off any grease or oil from the drive pulley faces.
0) DRIVE PULLEY FACE COLLAR
Install the movable drive face onto the crankshaft.
8«4L
Clean the drive
face and install it.
Set the washer onto the crankshaft and loosely install the drive
nut.
8-8