Honda CH250 Elite 1986 Service Manual page 114

8·15}.
left crankcase cover
Set the assembly collars and boit as shown and pull in the drive
shaft into the transmission cover.
Install the oil seal
onto
the drive shaft.
Install the countershaft, countergear, final shaft, final gear and
thrust washers.
Install the dowel pins and a new
Install the transmission case
cover.
Install the movable driven face/clutch
Install the drive drive belt and
(pages 8-4 and 8-81.
Install the rear wheel
15-4).
Fill the flnal reduction case with the spE,cif'ied oil (page 2-11.
FINAL REDUCTION
(2) ASSEMBLY COLLAR (2 PIECES)
07965-1660300
9-5