Honda CH250 Elite 1986 Service Manual page 161

Apply clean engine oil to the felt seal and install it.
Install the brake arm return spring.
Install the plate onto the brake cam aligning the
wide on the plate with the groove in the brake cam.
Install the brake arm aligning the punch marks on the brake
cam and arm.
Tighten the brake arm bolt.
TORQUE: 8-12 N·m fO.8-1.2kg-m. 6-9 ft-Ibl
lubricate the speedometer drive gear with grease and install
the drive gear in the brake panel.
STEERING/FRONT WHEEL/BRAKE/SUSPENSION
14-11