EVAPORATIVE EM ISSION
CONTROL SYSTEM
'",,!ifnrni,<:>
model
Check the hoses between the breather separator, fuel tank,
charcoal
and air cleaner for
or loose connec-
tions.
Replace as necessary.
( ) FUEL TANK
(2l
CHARCOAL
CANISTER
13l PURGE CONTROL
VALVE
- - f - - - - -
14l AIR CLEANER
BELT CASE AIR CLEANER
DRIVE BELT
Instal! the follovvin,o:
•
the element to the cover.
•
the element cover
the three screws.
•
the left rear cover.
it.
CAUTION
• Do not oil the element.
the element
Remove the follOlNir10:
•
the left rear cover
13-21.
•
the element cover
tube band.
•
the three element cover screws and element cover.
Remove the element from the cover and wash the element in
non-flammable
or
flash point solvent, squeeze out the sol-
vent
and
let
Remove the left side rail
13·3).
Remove the left crankcase cover
8-3;'
Inspect the drive belt for cracks, abnormal,
excessive wear
replace the drive belt,
if
necessary.
3-10