Table of Contents
Advertisement
FINAL REDUCTION
FINAl. REDUCTION DISASSEMBl.Y
Remove the driven
8·9).
Drain the transmission oil (Page
2·6).
Remove the rear wheel
15·2).
Remove the transmission case cover
removing the attach-
ing bolts.
Remove the
and dowel pins.
Remove the thrust washers.
Remove the final gear and final shaft.
Remove the countershaft and washer.
FINAL REDUCTION INSPECTION
Inspect the drive shaft and gear for wear of damage.
Inspect the
for excessive
or dalmage.
If it is necessary to
the shaft or
drive the drive
shaft out of the transmission cover with the
attached,
then remove the
from the drive shaft
the com-
mercial
and
Shaft
Protector
(07931-
18700001.
Remove the drive shaft oil seal from the transmission cover.
NOTE
• If the drive shaft is removed from the transmission cover,
the
must be
with a new one.
the countershaft and gear for wear or damage.
9-2
(2) COUNTERSHAFT
Advertisement
Table of Contents
Troubleshooting
