REMOVAL
Remove the set plate screws, set plate and auto
from
the carburetor.
FUEL SYSTEM
AUTO
INSPECTION
Check the auto bystarter valve and needle for wear, or other
1)
'''';;':iJL.<::
(21 VALVE
Insert the auto
into the carburetor body untill it bot-
toms.
Position the set plate into the upper groove in the
h\l.,t",,"tpr
with its closed side toward the carburetor body.
Install and
the two screws.
VACUUM CHAMBER
Loosen the drain screw and drain the fuel from the float cham-
ber.
Remove the two vacuum chamber cover screws and cover.
4-5