Cylinder Head Cover Removal; Cylinder Head Cover Disassembly - Honda CH250 Elite 1986 Service Manual

CYLINDER HEAD/VALVES
Remove the five cvlindisr head cover bolts, air cleaner stay and
cylinder head.
Slide the oil to the side to obtain clearance for re-
moval of the cylinder head cover.
12l OIL PIPE
ATTACHING BOLT
1)
the
4-16)
within the distance shown, or oil pipe will be
not to bent and
OaJ'11Gl>f'
the oil pipe when
Remove the air cleaner case mount bolt.
• Be
oil pipe.
• Slide the
bent.
CAUTION
Remove the folllov\/in!=!:
- fuel tank 4-16)
fuel tank insulator
Remove the two oil bolts on the cylinder head cover and
crankcase cover, and remove the oil bolt.
CYLINDER HEAD COVER REMOVAL
CYLINDER HEAD COVER DISASSEMBLY
Remove the valve lock bolts, and the rocker arm by re-
moving the rocker arm shaft.
(1) ROCKER ARMS
Measure the rocker arm I.D.
Measure the rocker arm shaft
0.0.
SERVICE LIMIT: 11.91 mm 10.469 in)
for damage and replace if necessary. Inspect the
ROCKER ARM
Inspect the rocker arm for wear or dalmage.
SERVICE LIMIT: 12.10
mm 10.476
inl
ROCKER ARM SHAFT
the rocker arm shaft for wear or dalTlage.
6-3