Drive Pulley Clutch/Driven Pulley Service Information - Honda CH250 Elite 1986 Service Manual

8. DRIVE PULLEYICLUTCH/DRIVEN PULLEY
SERVICE INFORMATION
CRANKCASE COVER
SERVICE INFORMATION
8-1
8-2
8-3
DRIVE BELT
DRIVE PULLEY
CLUTCH/DRIVEN PULLEY
8-4
8-5
8-9
clutch and driven can be serviced with the
grease and oil on the drive belt and pulley faces.
installed.
ITEM
STANDARD mm (in) SERVICE LIMIT mm
(in)
- - -
..
drive face bushing I.D. 27.000--27.021 (1.0630-1.0638)
27.06 11.065)
Drive face boss 0.0. 26.970-26.990 (1.0618-1.0626)
26.94 (1.061)
belt width 22.0-23.0 (0.87-0.911 21.7 (0.85)
- -
:lutch 19 thickness
- -
2.0 (0.081
Clutch outer I.D. 135.0-135.215.31-5.32)
135.5 (5.33)
-_._-
Driven face spring free length 98.8 (3.891
94.0 (3.70)
Driven face 0.0. 39.965-39.985 (1.5734-1.5742) 39.94 (1.572)
Movable driven face I.D. 40.000-40.025 (1.5748-1.57581
40.06 (1.5771
Drive face nut
Drive face seal cover bolt
Clutch outer nut
Movable driven face nut
TOOLS
Special
Lock nut wrench, 41 mm
Drive holder
Clutch compressor
Driver
Common
Universal holder
Driver
Pilot, 15 mm
Pilot, 22 mm
Attachment, 24 x 26 mm
Attachment, 32 x 35 mm
80-100 N'm (3.0-1 0.0 kg-m, 58- 72 ft-Ib)
2.5-4.0 N'm (0.25-0.4 1.8-2.9 ft-Ibl
50-60 N'm (5.0-6.0 36-43 ft-Ib)
50-60 N'm (5.0-6.0 kg-m, 36-43 ft-Ib)
07916-9580300
07923-KM10000
07960--KM10000
07949-3710001
07725--0030000
07749--0010000 or 07949-3710001
07746--0040300
07746-0041000
07746-0010700
07746-0010100
8-1