Brake Lock Lever; Brake Light Switch/Starter Limiter Switch; Rear Brake - Honda CH250 Elite 1986 Service Manual

MAINTENANCE
REAR BRAKE
Measure the rear brake pedal free play at the top of the pedal.
FREE PLAY: 20-30 mm (3/4-1-1/8 inl
NOTE
• Normal distance between the top of the brake pedal and the
floor board is 30-40 mm (1-1/8--1-1/2 in) with the pedal
depressed.
Adjust the rear brake by turning the rear brake adjusting nut.
BRAKE LOCK LEVER
Check the brake lock lever for smooth operation.
If the lock lever does not return smoothly when released,
remove the brake lock cover and apply grease to the brake lock
pin, sliding surface of the cam and brake lock cam pivot.
Refer to page 15-8 for brake lock adjustment.
BRAKE LIGHT SWITCHI
STARTER LIMITER SWITCH
NOTE
• Perform the brake light switch adjustment after adjusting
the brake pedal play.
- - - - -
Adjust the brake light/starter limiter switch as follows.
- Depress the brake pedal about 45-50 mm (13/4-2.0 in).
- Move the adustment nut so that the starter will engage at
that point.
- The rear brake adjustment should be such the rear
wheel is locked when the starter engages.
After adjustment, check the brake switch operation. The brake
light should come on when depressing the brake pedal 20
mm 10.2-0.8 in).
3-12