Engine Removal - Honda CH250 Elite 1986 Service Manual

ENGINE REMOVAL/INSTALLATION
ENGINE REMOVAL
Disconnect the cable.
Remove the right and left rear cover and center cover (section
13).
Drain the engine oil 2-2).
Drain the coolant 12-3).
Disconnect the fuel tube from the carburetor.
Disconnect the thermosensor wire.
Disconnect the water hoses from the thermostat case and
water pump.
Remove the right foot peg step by
rA,nn"i ...,n
the two bolts.
Loosen the connecting tube bands and remove the air cleaner
chamber.
5-2