Honda CH250 Elite 1986 Service Manual page 155

STEERING/FRONT WHEEl/BRAKElSUSPENSION
the right handlebar switch housing
to the grip, grip pipe flange.
hal1dleolU switch onto handlebar
hOIJsirlg with the hole in the handlebar.
Apply grease to the end of the throttle cables.
Install the two housing attaching screws and tighten the for-
ward screw first, then tighten the rear screw.
Connect the wire coupler and connectors.
Install the wire band.
(1 ) WIRE BAND
\
Install the left handlebar switch housing aligning the pin on the
housing with the hole in the handlebar.
Install the two housing attaching screws and tighten forward
screw first, then the rear screw.
Install the removed parts in the reverse order of removal and
check the following;
_. throttle (page 3-4)
- brake lever free play (page
3-11l
nn",,,,tir,n
of all equipment (section 16).
14-5