Mechanical Seal Replacement; Water Pump Shaft Installation - Honda CH250 Elite 1986 Service Manual

COOLING SYSTEM
MECHANiCAL SEAL REPLACEMENT
Remove the mechanical seal and oil seal out of the rightcrank-
case cover using a bearing remover.
Tools:
Bearing remover, 15
mm
07936-KC10500
Rem.over weight 07141 -0010200
Or
01936-3110200
Drive a new oil seal cover with the marks
out.
Apply surface of a new mechanic<Wseal,
Install the mechanical seal into the cover.
MECHANICt\L SEAL DRIVER ATTACHMENT
07945 - 4150400 or GN-AH-065-41 5
(U.S.A. only)
WATER PUMP SHAFT INSTALLATION
Install the water
pump
shaft
Install tile $oap ring into ring groove to
Install the right crankcase cover.
12-8
bearing,