Engine Oil Level; Engine Oil Change; Engine Oil Filter Screen Cleaning - Honda CH250 Elite 1986 Service Manual

Table of Contents

Advertisement

lUBRICATION
Check the oil level with the filler cal:>/dipsticlk.
Do not screw in the
when
this check.
If the level Is near the lower level, fill to the upper level with the
recommended engine oil.
(3) LOWER
on level
ENGINE Oil
Warm lip the engine.
the
and support the scooter
NOTE
Drain the oil from the crankcase while the
This ensures
and rapid dnalini,na.
is warm.
Place the oil pan under the engine.
Remove the oil filler
and oil filter screen cap and
drain the
oil.
After the oil has been
drained, be sure the O-ring is
in good condition and install the filter screen and cap.
TORQUE.:
10~35
N-m 11.0-3.5 kg-m. 7-25 ft-Ibl
oil(page 2-1)
Trmnilcm
the oil
Pour the recommended
filler hole.
ENGINE. Oil CAPACITY:
0.8 liter (0.85 US qt.
0.70 Imp
qt ) at change
Reinstall the oil filler
and start the
idle for few minutes.
Recheck the oil level.
Check that there are no oll leaks.
and let it
ENGINE Oil FILTER SCREEN CLEANING
Drain the
Remove the
and filter screen.
Clean the oil filter screen.
Make sure that the
is good condition and install the filter
screen and
Install and
the oil filter screen cap.
TORQUE:
18-22
N-m(1.8-2.2 kg-m.
13-16
ft-Ibl
Pour the recommended engine oil (page 2-1) through the oil
filler cap.
2-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ch250 1986

Table of Contents