Talkswitch 24-CA User Manual page 83

Number to call back:
Enter the Call Back number exactly as you would normally dial the
number (i.e. do not enter a line Hunt Group in the dialing string).
Use dialing prefix:
If you have to dial the same prefix every time when using Auto Call Back
(i.e. long distance calling card number), enable 'Use dialing prefix' . Enter
the dialing prefix including any required pauses or feature keys like
*
or # . Use a comma to insert a 2-second pause. For example, if you
want to disable Call Waiting and want to dial a long distance prefix
before dialing the long distance number, enter the following:
*
*70,1010555,, This corresponds to 70 for disabling the Call Waiting
feature, a 2 second pause to wait for the new dial tone, 1010555 for the
long distance prefix, and a 4 second pause to wait for the new dial tone
before dialing the long distance phone number.
Number used to trigger Auto Call Back:
Select the line/phone number that you dial when out of the office to
trigger Auto Call Back. TalkSwitch initiates the Call Back using the same
line you initially called. You can make configuration changes to Auto Call
Back by dialing into this phone number only.
T A L K S W I T C H C O N F I G U R A T I O N 7 5