Talkswitch 24-CA User Manual page 150

90 Set to Serial connection mode (default)
91 Set to USB connection mode
2xx 8<phone Enter Remote ext. (2xx) phone number
number>
2xx 980 0 Enter Remote ext. (2xx) Turn off "Same Line Connect"
2xx 980 1 Enter Remote ext. (2xx) Turn on "Same Line Connect"
2xx 9 <Hunt Enter Remote ext. (2xx) "Connect using:" Hunt Group
Group> (Hunt Group = 9, 81–88)
1xx 61 Enable 'Do not Disturb' at the Local Extension
1xx 60 Disable 'Do not Disturb' at the Local Extension
DTMF dialed from a Local Extension
Command Function performed
111–114 Intercoms a Local Exten-
sion
211–218 Dials a Remote Extension
(associated with an exter-
nal phone number).
300–309 Dials an Extension Ring
Group. 10 in total for the
entire system. Mapped to
local extension(s), with
specific fall through
options.
<flash> if Puts caller on hold.
connected
to a caller
1 4 2 T A L K S W I T C H U S E R G U I D E • N O R T H A M E R I C A
Notes
Direct dial from dialtone;
Direct dial from internal
dialtone;
Direct dial from internal
dialtone;
After putting a caller on
hold, you receive internal
dialtone;