Talkswitch 24-CA User Manual page 20

extension or voice mailbox cannot be reached, the caller hears a system
prompt to the effect: "The extension you are trying to reach is currently
unavailable, please try again later."
Outgoing Line Hunt Groups
By default, when two or more units are on a LAN, the system tries placing
calls out on the same TalkSwitch unit the call originates from. This avoids
using a line across the LAN on another unit, which helps to minimize the
LAN traffic and optimizes the opportunity for all inbound calls to connect
across the LAN if required.
Auto Attendants
There are a total of 9 Auto Attendants that are shared by all units on the
LAN. When an Auto Attendant is recorded on any unit, it is then
automatically copied to all other units on the LAN. This design minimizes
LAN traffic and also provides functionality back-up in case a unit or units
have 'disappeared' off the network (adapter unplugged, LAN connection
disconnected, LAN failure etc.). In this event, all units can still answer
inbound calls with the same Auto Attendant messages).
Voicemail
All Local Extension and Remote Extension Voicemail data is stored on the
unit where the extensions normally reside. For example, all greetings,
directory names and voicemail messages for extensions 121-128, 221-228 and
mailboxes 420-429 are stored on the TalkSwitch with Unit ID 2. If a unit is
completely filled with voicemail messages, new messages will not be stored
on other units. The system will simply not accept anymore messages for
mailboxes belonging to that unit. If you need more memory, TalkSwitch
Memory Cards can be purchased from your reseller. You can also use the
Voicemail Memory Manager to view the memory usage of each TalkSwitch unit
and each mailbox.
1 2 T A L K S S W I T C H US E R G UI D E • N O R T H A M E R I C A