Using Call Back - Talkswitch 24-CA User Manual

a) Make another call
Press # #
You can dial another number or redial the same number.
b) Activate the Auto Attendant
Press # *
the Auto Attendant. Once the Auto Attendant message begins
playing, you have the following options:
•
Dial # (and enter a password if applicable) to enter Command
Mode.
•
Dial '6' to change/enter Call Back settings.
•
Dial one of your extension numbers (Local, Remote or Ring Group).
This option allows you to contact someone in your office, check
your voicemail, etc.
c) End the Call Bridge Session
Hang up. This ends your Call Bridge session and disconnects you from
TalkSwitch. If you want to guarantee that TalkSwitch disconnects at
the end of a Call Bridge session, press
The Call Bridge telephone number dialed can be any telephone number: local,
long distance, toll free (800 and 888) or international. Enter the telephone
number as you would in your office. For long distance calls, do not forget to
include the '1', country code, and area code.

3.7.2 Using Call Back

The Call Back feature allows you to initiate TalkSwitch to call you at a
specified telephone number. This gives you access to any of the following:
•
Call Bridge
•
Local Extensions, Remote Extensions and Extension Ring Groups
•
Voicemail
•
Configuration settings
Using Call Back involves 3 easy steps:
1. You call your TalkSwitch telephone number to activate Call Back.
2. You answer and accept the Call Back. (TalkSwitch calls you back within
30 seconds.)
3. At the Auto Attendant you can choose to perform Call Bridge, dial any
extension, access and retrieve voicemail or configure TalkSwitch.
U S I N G T A L K S W I T C H
. TalkSwitch disconnects you from the call in progress.
. TalkSwitch ends the Call Bridge session and activates
# # and then hang up.
1 0 9