Telephone Lines - Talkswitch 24-CA User Manual

2.3.5.3

Telephone Lines

This section describes how TalkSwitch handles incoming calls based on the
incoming line and ring cadence (distinctive ring numbers).
On an incoming call during mode 1 or 2
Select a line to configure and select Mode 1 or Mode 2 where you want
TalkSwitch to use these settings. If you entered the phone number in the
Telephone Lines section under System Information, the number displays on
the corresponding button.
Ring Extensions only (no Auto Attendant is played)
If you don't want the Auto Attendant to answer calls on this line, select
this option. All the Local Extensions are set to ring immediately during
an inbound call by default. No Call Cascade actions (such as voicemail)
can be performed if you select this option.
Select the Local Extensions you would like to ring. All activated local
extensions ring by default. If you require certain Extensions to ring in a
sequence (i.e. one extension rings first, then another one on the 2nd
ring), click the 'Adjust Sequence' button to configure.
6 4 T A L K S W I T C H U S E R G U I D E • N O R T H A M E R I C A