Serial Interface - Real Time To Serial Interface - Talkswitch 24-CA User Manual

4.2.2 Serial Interface — Real Time to Serial Interface
In order to capture the data in a real time environment you must have a PC
connected to TalkSwitch Unit ID 1 with a serial cable.
1. Launch Hyper Terminal by clicking Start -> Programs ->
Accessories -> Communications -> HyperTerminal.
2. A window pops up prompting for a connection name. Enter TalkSwitch,
then click OK.
Note: If you have not used Hyper Terminal before you will be prompted to
set this program as a default telnet application and enter your area code.
3. In the Connect using: drop-down menu, select the PC COM port that the
serial cable is connected to, then click OK.
1 1 8 T A L K S W I T C H U S E R G U I D E • N O R T H A M E R I C A