Voip Numbers - Talkswitch 24-CA User Manual

Hunt/Rollover/Busy Forwarding
Check this box if the current line is associated with a Line Hunt or Line
Rollover service from the Telephone Company. In general, any lines that
belong to a Hunt/Rollover group should be configured to handle calls the
same way.
Calibrate Lines (button):
Click this button whenever a line is added or changed. Calibrate Lines
allows TalkSwitch to optimize lines for Call Bridge and Call Forwarding.
Note: Only lines that are detected get calibrated.
Note: Section 2.3.3.5 only applies to TalkSwitch 48-CA/CVA users.
TalkSwitch 24-CA users can continue in section 2.3.3.6 — Line Hunt
Groups.
2.3.3.5

VoIP Numbers

The TalkSwitch 48-CVA supports 4 VoIP lines per unit. Up to 12 VoIP phone
numbers can be assigned for each 48-CVA so that unique call handling
scenarios can be configured for up to 12 numbers. For example, you might
assign a general number for customers to reach the main Auto Attendant
greeting and configure up to 11 other numbers so that the inbound calls ring
straight through to specific extensions in the office.
T A L K S W I T C H C O N F I G U R A T I O N 3 1