Talkswitch 24-CA User Manual page 42

Hunt Group 83:
Hunt Group 84:
Hunt Group 88:
Note: Hunt Groups 83 and 84 only apply to 48 models.
Select a Line Hunt Group and enter a unique name to identify this Hunt
Group elsewhere in the configuration software.
Under 'Set Line Hunt Group', select the Line Type. If you wish to use this
Hunt Group to access telephone lines, select 'Phone Lines' . To use this Hunt
Group to access VoIP numbers, select 'VoIP numbers' .
Under 'Set Line Hunt Group', select the lines you wish to add to the Hunt
Group by checking the box next to the line.
Note: If multiple TalkSwitch units are connected to the LAN,
a check box is enabled, so that outbound calls always hunt
the lines on the unit where the extension is connected. This
minimizes network traffic between units.
3 4
selects telephone Line 3
selects telephone Line 4
selects any available VoIP number (only applies
when a 48-CVA is present on the LAN)
T A L K S W I T C H U S E R G U I D E • N O R T H A M E R I C A