How To Process Received Mail (Running Mail) - Neopost IS-5000 Operator's Manual

Change the Type of Meter Impression.
2.
Press
To change the type of Meter Impression, select Impression Type and then select
3.
[Received] in the Type of Impression Screen. For more details, see
the Type of Meter Impression
At this point you can also :
3
- Activate or deactivate printing the Date
- Activate or deactivate printing 'Received'.
The screen indicates the current status of these options.
Select an option to change. The color of the selection keys indicate the current status
of the options.
Press
Other Available Settings:
1. You can adjust the print location of your Impression on your envelopes if necessary.
Adjusting the print location (Print Offset) is used to compensate for envelopes with a
steep edge. See
You are now ready to process your mail.
Running Mail
Once you have completed setting up your Impression, follow the instructions below to print
a Received Mail Meter Impression.

How to process Received Mail (Running Mail)

To print a Received Mail Meter Impression:
1. Place the envelopes (or stack) in the Hopper. The items should be placed against the
rear wall and covering the optical (clear) sensor. The recommended print area on the
envelope is either on the back or upside down on the front.
66
to access the Build Impression Screen:
on page 72.
to return to the Home Screen.
How to move a Meter Impression (Print Offset)
How to change
on page 87.