How To Fill The Automatic Label Dispenser - Neopost IS-5000 Operator's Manual

Filling the Automatic Label Dispenser
The Automatic Label Dispenser allows you to print postage on precut Labels.
You can put up to 50 Labels in the Automatic Label Dispenser.
3

How to fill the Automatic Label Dispenser

To fill the Automatic Label Dispenser:
1. Stack the Labels and insert them into the Label Dispenser, faced to print on the
right-hand side .
2. Push the block of Labels down firmly, until you hit the stop.
96
When Labels are not being used, we recommend that they be stored
flat in the Catch Tray or Hopper Label Receptacle.
If the Labels have a peel-off tab, place the tab on the top.
Use several Labels, as a small number of Labels would not be rigid
enough to be put in place without folding.