Inserter Mode; How To Activate The Mechanical Inserter Connection - Neopost IS-5000 Operator's Manual

8.14
A Neopost Folder/Inserter can be connected to your Mailing System if required. If you have
the electronic connection option, the Inserter controls the Mailing System. This electronic
connection uses an RS232 cable between the Inserter and the Base of the Mailing System
to communicate.
If your Mailing System and the Inserter are not electronically connected, you need to activate
"Inserter Mode ON" to use the Mailing System with the Inserter.
You can set the "Inserter Mode ON" as the Default Mode by logging in as the Supervisor.
Activating an Inserter Mechanical-only (Physical)
Connection

How to activate the Mechanical Inserter Connection

8
As User:
1.
Press

Inserter Mode

2. Select ON or OFF and press [OK] .
The Inserter Mode is activated or deactivated.
Setting the Mechanical Inserter Connection as a Default
Setting
Follow the instructions below to allow your Mailing System work with an Inserter without
an electronic connection.
220

Inserter Mode

and type 3.11 or select the path: