2.
Remove the envelope from the Weighing Platform.
3.
Place an envelope (or stack) in the hopper. Your items should be placed against the
rear wall and covering the optical (clear) sensor.
3
The Mailing System applies postage and the envelopes are sent to the mail tray or
stacker.
To print one or more identical Labels
1.
Press
A Label Selection Screen is displayed.
2.
Type the number of Labels you wish to print.
3.
You may change the Label Dispenser you want to use (if the Automatic Label Dispenser
is connected), by pressing Print On.
4.
Press
54
.
to start printing.