Processing Mail In Dynamic Weighing Modes - Neopost IS-5000 Operator's Manual

Processing Mail Using the Dynamic Weighing Module
The iWeigh Dynamic Weighing Module uses a four-point detection system to weigh and
rate mail. It measures the length, width, thickness and weight to properly determine the
mailing format within the mail class (that is to say letter vs. flat) and rate the mail pieces.
Two modes are available when using the Dynamic Weighing Module:
• Dynamic Weighing : the Dynamic Weighing Module measures and weighs each
3
piece. Use this for mixed mail rating.
• Weigh First Piece : the Dynamic Weighing Module only measures and weighs the
first piece for an identical batch of mail. Use this to validate the correct postage rate
for the first piece.

Processing Mail in Dynamic Weighing Modes

In Weigh All Mode (
From the Home Screen:
1. Place your stack of mail in the Hopper.
For more details, see
2.
Press
The system will now feed (seal), weigh, rate, and print meter Impression on each
piece of mail.
In Weigh First Piece Mode (
1. Place your stack of same size/weight mail in the Hopper.
For more details, see
52
)
Using the Mixed Mail Feeder
to start processing the stack.
At any time, to stop the motors and printing, press
will process any mail piece(s) already in print path and then stop.
Using the Mixed Mail Feeder
)
on page 91 .
.The System
on page 91 .