How To Clean The Feeder Belts And Rollers; How To Clean The Mail Path Sensors - Neopost IS-5000 Operator's Manual

Cleaning Feeder Belts and Rollers
Follow the instructions below to clean the Belts and Rollers of the Mixed Mail Feeder and
the Dynamic Scale (if installed)

How to clean the Feeder Belts and Rollers

To clean the Feeder Belts and Rollers:
1. Open the equipment covers.
2. Clean the belts and/or rollers with a damp cloth.
3. Close the covers.
Cleaning the Mail Path Sensors
The Mail Path Sensors are light sensitive devices that detect and monitor the status of your
envelopes as they travel along the mail path.
Follow the instructions outlined below to properly clean the Mail Path Sensors on your
Base, Feeder, and optional Dynamic Scale.

How to clean the Mail Path Sensors

To clean the Mail Path Sensors:
1. Use a damp cloth or 70% alcohol on a cotton applicator..
2. Allow the parts to dry and close all covers and assemblies.
10
257