How To Change The Default Time-Out Settings - Neopost IS-5000 Operator's Manual

Default Time-Out Settings

How to change the Default Time-Out Settings

To change your Default Time-Out Settings:
Log in as the Supervisor (see
1.
Press
Default User Settings
The Time-Out Setting Screen appears.
8
2. Select each field, then specify the length of each Time-Out Setting.
Use the [C] key to clear your current settings, then re-set your settings by entering a
new value.
3. Press [OK] to validate.
194
How to log in as Supervisor
and type 3.5 or select the path:
System Settings
on page 184), then:
Time-Out Settings