Enabling/Disabling Sounds; How To Enable / Disable Sounds; How To Change The Default Sound Settings - Neopost IS-5000 Operator's Manual

8.4
You can enable or disable the following sounds:
• Keys Sounds
• Alert Sounds for warnings and errors.

How to enable / disable Sounds

To enable or disable Sounds for a particular job run:
Login as a User:
1.
Press
Preferences
8
2. Select the Beep on Key and/or Beep on Error check boxes to enable these sounds.
3. Press [OK] to validate your selection.
Setting Default Sounds

How to change the Default Sound Settings

To change your Default Sound Settings:
Log in as the Supervisor (see
1.
Press
Default User Settings
2. Select the Beep on Key and/or Beep on Error check boxes to enable these sounds.
3. Press [OK] to validate your selections.
188

Enabling/Disabling Sounds

and type 11.2 or select the path:
Sounds
This is a User Setting that will only be active as long as you are
logged in as a User. Once you log out, the Default Sound Settings
will be re-activated.
and type 3.1.2 or select the path:
How to log in as Supervisor
Default User Preferences
on page 184), then:
Sounds