How To Clean The Feeder Belts And Rollers; How To Clean The Mail Path Sensors - Neopost in-600 Series User Manual

How to Clean the Feeder Belts and Rollers

To clean the feeder belts and rollers:
1. Open the Auto-Feeder cover, press the upper blue handle to raise the drive assembly.
2. Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton applicator.
3. Push down the upper drive assembly until it locks back into position and close the
feeder cover.
Cleaning Mail Path Sensors
10
The sensors are light sensitive devices successively covered by the envelopes during their
travel along the mail path.
Clean the mail path sensors as indicated below on system base and feeder.

How to Clean the Mail Path Sensors

To clean the mail path sensors:
1. Use a damp cloth or 70° alcohol on a cotton applicator.
2. Allow the parts to dry and close all covers and assemblies.
220