Writing To The Standard Rom And Flash Card By Gx Developer - Mitsubishi 00JCPU User Manual

5.2.6 Writing to the standard ROM and Flash card by GX Developer

(1) Methods for writing data to the
applications
Figure 5.24 provides the methods for writing data to the standard ROM and Flash card.
CPU module
Standard
ROM
Figure 5.24 Methods for writing data to the standard ROM and Flash card
(a) Writing by "Write the program memory to ROM"
Data in the program memory are batch-written to the Flash card.
To batch-write the data, select [Online]
in GX Developer.
Use this method when:
• debugging the program in the program memory and writing the debugged program to the Flash card
without change for boot operation (
• storing the data in the program memory to the Flash card without battery backup.
(b) Writing by "Write to PLC (Flash ROM)"
Files specified by GX Developer are batch-written to the Flash card.
To batch-write the files, select [Online]
Developer.
Use this method when:
• storing parameters, device initial values, or device comments whose size exceeds the program memory
capacity to the Flash card, or
• using file registers storied in the Flash card.
standard ROM and
Program
memory
Writing
Flash
card
Writing
Writing by "Write the program memory
to ROM" (
Writing by "Write to PLC (Flash ROM)"
[Write to PLC (Flash ROM)]
Section 5.2.8), or
[Write to PLC (Flash ROM)]
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
Flash card and
GX Developer
(a) below
)
(b) below
( )
[Write the program memory to ROM]
[Write to PLC (Flash ROM)] in GX
1
2
3
4
5
6
7
8
5 - 26