Mitsubishi 00JCPU User Manual page 176

Table5.12 Calculation of file size (High Performance model QCPU, Process CPU, and Redundant CPU) (continued)
Function
Local device
*1: 136 is set by default (This value depends on the parameter setting).
*2: After the decimal point of a value found by the number of bit device points/16 is rounded up.
Remark
For calculation example of memory capacity, refer to Section 5.4.4.
5 - 47
72 + 6 (set device type) + (2
+ 18 (total number of T, ST, and C points)/16))
• M, V, D, T, ST, and C indicate the following set devices.
M: internal relay
V: edge relay
D: data register
T: timer
ST: retentive timer
C: counter
Rough file capacity (unit: Byte)
((total number of M and V points)/16 + (number of D points)
(number of programs)