Writing To The Flash Rom - Mitsubishi FX3UC Series Operation Manual

FX Configurator-FP
Operation Manual
7.3.2

Writing to the Flash ROM

Storing [positioning parameters, servo parameters and table information written beforehand in the 20SSC-H
BFM] in the Flash ROM. After setting up and adjusting the system, it is handy when storing [positioning
parameters, servo parameters and table information] in the BFM.
1
Select [Online] → [Flash ROM write].
[Flash ROM write (BFM -> Flash ROM)] appears.
2
Select the data to be stored in the Flash ROM.
Item
COM port
Transmission speed
Module No.
Item
Positioning parameters
Servo parameters
Table information
<OK>
<Cancel>
3
Click <OK>.
FX Configurator-FP stores the selected 20SSC-H BFM data in the Flash ROM.
Caution
While data on the X- or Y-axis cannot be written, data on both the X- and Y-axes cannot be written to the flash
ROM.
Wait until data on both the X- and Y-axes can be written, and then write data to the flash ROM.
58
7.3 Writing [positioning/servo parameters and table information]
Displays [COM port] in [Connection setup] dialog box
Displays [Transmission speed] in [Connection setup] dialog box
Displays [Module No.] in [Connection setup] dialog box
Ticks off the data to be stored
Ticks off the axis of positioning parameters to be stored
• X-axis
• Y-axis
Ticks off the axis of servo parameters to be stored
• X-axis
• Y-axis
Ticks off the axis of table information to be stored
• X-axis
• Y-axis
• XY-axis
Store the selected data in the BFM
Cancels selecting and closes the dialog box
7 Read / Write / Verify / Initialize
Description